The VK0100 is a fully-customizable 8-button Control Pad that integrates a controller with a keypad as an all-in-one solution. Aimed for small \/ medium meeting room or classroom control, the VK0100 offers a ready-to-use solution that easily connects the devices, configures via the intuitive\u00a0VK6000<\/a>\u00a0Configurator Software, and flexibly customizes keypad button functions and layout to fulfill most applications.<\/p>\n <\/p>\n The\u00a0ATEN Control System<\/a>\u00a0is an\u00a0Ethernet-based management system<\/a>\u00a0that connects all the hardware devices found in a room for centralized control effortlessly. The VK0100 Control Pad not only plays the role as the main controller that connects the hardware devices, but also acts as a control interface with customizable buttons and layout. Created with flexibility in mind, the one-gang Control Pad can be laid out in 14 different combinations of 4 to 8 buttons that snap together as easy as Lego.By connecting to the local network, users will find it\u2019s effortless using\u00a0VK6000<\/a>\u00a0software to configure the desired control of any connected device from the Control Pad. With the ready-to-go combo Control Pad, users have instant and smart control of the facilities from a Control Pad that can manage any device in the room.<\/p>\n<\/div>\n<\/div>\n<\/div>\n Note: This model is also available in black color \u2013 Part number: VK01001, which is a built-to-order product. Custom button placement on the Control Pad can be set in 14 different combinations of 4 to 8 buttons. ATEN has released\u00a0VK101<\/a>, an ergonomically designed, US-type, 1-Gang tabletop kit compatible with the VK0100, to further enhance the ease-of-use and installation flexibility of the control pad.\u00a0VK101<\/a>\u00a0is sold separately.<\/p>\n<\/div>\n<\/div>\n<\/div>\n Ergonomically tilts VK0100 at an angle to reduce the force needed when one presses keys while delivering easy cable arrangement<\/p>\n<\/div>\n<\/div>\n<\/div>\n Enables flexible installation for either placement on the table or mounting on the wall<\/p>\n <\/p>\n Datasheet<\/p>\n![\"Control](\"https:\/\/assets.aten.com\/product\/overview\/global_en\/VK\/VK0100\/VK0100-White-Black.jpg\")
<\/div>\n<\/div>\n
\nTo place an order, please contact your regional ATEN representative.<\/p>\n<\/div>\n<\/div>\n<\/div>\n![\"\"](\"https:\/\/assets.aten.com\/product\/overview\/global_en\/VK\/VK0100\/VK0100-keypad.jpg\")
<\/div>\n<\/div>\n
\nThe example above shows the 10 most commonly used.<\/p>\n<\/div>\n<\/div>\n<\/div>\nErgonomic support with flexible mounting via VK101<\/h3>\n
![\"\"](\"https:\/\/assets.aten.com\/product\/overview\/global_en\/VK\/VK0100\/VK0100-angle37.jpg\")
<\/div>\n<\/div>\n![\"\"](\"https:\/\/assets.aten.com\/product\/overview\/global_en\/VK\/VK0100\/vk0100-Wall.jpg\")
<\/div>\n<\/div>\n<\/h3>\n
Spesification<\/h3>\n
\n\n
\n Interfaces<\/td>\n<\/tr>\n \n Keypad Layout<\/td>\n 4~8 buttons customizable in 14 keypad layouts<\/td>\n<\/tr>\n \n Serial<\/td>\n \u2022\u00a02 x Bi-directional RS-232 Port
\n(2 x 3-Pole Terminal Block Connector);
\n\u2013\u00a0Baud Rate: 300 to 115200 (default: 9600);
\n\u2013\u00a0Data Bit: 8 (default) or 7;
\n\u2013\u00a0Stop Bit: 1 (default) or 2;
\n\u2013\u00a0Parity: None (default), even or odd<\/td>\n<\/tr>\n\n Relay<\/td>\n \u2022\u00a02 x Relay Channel (2 x 2-Pole Terminal Block Connector);
\n\u2022\u00a0Normally open, isolated Relays;
\n\u2022\u00a0Contact Rating: Max 24 VDC, 1A<\/td>\n<\/tr>\n\n I\/O<\/td>\n \u2022\u00a01 x Digital Input Channel
\n(1 x 2-Pole Terminal Block Connector);
\n\u2013\u00a0VDC Mode
\nInput Voltage Range: 0 to 5 VDC;
\nProgrammable Range: 1 to 5 VDC;
\n\u2013\u00a0Dry Contact Mode
\nPull-up 2k ohms to + 5 VDC<\/td>\n<\/tr>\n\n Ethernet<\/td>\n \u2022\u00a01 x RJ-45 Female, 10\/100Base-T
\n\u2022\u00a0Supported Protocol: ARP, ICMP, TCP\/IP, DHCP, HTTPS, SSH
\n\u2022\u00a0DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
\nIP: 192.168.0.60
\nSubnet Mask: 255.255.255.0<\/td>\n<\/tr>\n\n Switches<\/td>\n<\/tr>\n \n Controller ID<\/td>\n 1 x 16-segment Switch<\/td>\n<\/tr>\n \n Reset Button<\/td>\n 1 x Semi-recessed Pushbutton<\/td>\n<\/tr>\n \n Power Consumption<\/td>\n DC5V:1.1W:5BTU\/h
\nPOE:1.375W:6BTU\/hNote:
\n\u25cf The measurement in Watts indicates the typical power consumption of the device with no external loading.
\n\u25cf The measurement in BTU\/h indicates the power consumption of the device when it is fully loaded.<\/td>\n<\/tr>\n\n Environmental<\/td>\n<\/tr>\n \n Operating Temperature<\/td>\n 0\u00a0\u2013\u00a050\u00b0C<\/td>\n<\/tr>\n \n Storage Temperature<\/td>\n \u201320\u00a0\u2013\u00a060\u00b0C<\/td>\n<\/tr>\n \n Humidity<\/td>\n 0 – 80% RH, Non-Condensing<\/td>\n<\/tr>\n \n Physical Properties<\/td>\n<\/tr>\n \n Housing<\/td>\n Plastic<\/td>\n<\/tr>\n \n Weight<\/td>\n 0.16 kg ( 0.35 lb )<\/td>\n<\/tr>\n \n Dimensions (L x W x H)<\/td>\n 11.63 x 7.06 x 4.80 cm
\n(4.58 x 2.78 x 1.89 in.)<\/td>\n<\/tr>\n\n License<\/td>\n<\/tr>\n \n Max. No. Allowed<\/td>\n 10 licenses<\/td>\n<\/tr>\n \n Note<\/td>\n Each time a mobile device connects to an ATEN Control Pad for remote control, one license on the Control Pad will be occupied. To purchase and add additional licenses to your ATEN Control Pad, contact your local sales representative for more information.<\/td>\n<\/tr>\n \n Note<\/td>\n For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n \n\n
\n File Name<\/td>\n Release Date<\/td>\n<\/tr>\n \n vk0100-vk0200-user-manual-w.pdf (3.64 MB)\u00a0<\/i>\u00a0<\/a><\/td>\n 2025-07-11<\/td>\n<\/tr>\n \n control-system-software-guide-w.pdf (7.92 MB)\u00a0<\/i>\u00a0<\/a><\/td>\n 2025-07-11<\/td>\n<\/tr>\n \n ATEN-Control-System-CLI-reference-guide-w.pdf (831.68 KB)\u00a0<\/i>\u00a0<\/a><\/td>\n 2024-12-03<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n